Monthly Archives: September 2011

Coiled Tubing Unit

Coiled tubing unit in excellent condition, available immediately for rental or purchase, with the following specifications:

AKER MARITIME 295 COILED TUBING RIG

Maritime hydraulics 295D001 coiled tubing rig, Lantec LW330 hydraulic drawworks w/7/8” line, powered by Cummins N14 diesel engine with electric start, radiator, Allison CLT-755 transmission, Lima 18 kw AC generator, Maritime 62’ high mast 100,000# static hook load with crown sheaves, hydraulically raised, (2) 4-stage raising rams. Maritime Hydraulics RT100S303D100 injector head with 100,000# max pulldown, 40,000# max snubbing. Maritime hydraulics 295D300 8’5”W x 9’4”L control cabin with Pason drilling system, Maritime hydraulics 295D100 tubing reel, Nov 295D100 additional tubing reel, Maritime hydraulics 295D400 power unit, Vanoil 4-1/16” stripper with side door, Vanoil 2” rotating joint, mounted on Peerless CH-48-3S 54’L tri axle trailer with 11R24.5 tires, END Drill Systems 16” rotary table.

Torus annular blowout preventor 7” x 3M,

Shopbuilt 8’W x 16’L doghouse with lockers, knowledge box, lights, skidded. Shopbuilt 8’W x 10’L parts house with parts bins, lights, mounted catwalk trailer.

Cat SR-4 205kw AC generators p/b Caterpillar 3306 diesel engine with electric start, radiator, gauges. Quincy QSF-60 air compressor p/b Baldor 50 hp electric motor. Shopbuilt electrical panels. Square D 75 ka transformer.

10’W x 6’H x 38’L 391 bbl tandem axle mud tank with 15’L mud house, top mounted walkways, safety rails, lights.

Mission 4 x 5” centfifugal pump p/bBaldor 50 hp electric motor.

Derrick single, single screen linear motion shale shaker.

Water/Fuel tanks: shop built 12’W x 8’H x 12’L 345 bbl water tank, mounted utility house skid.

Shopbuilt 16’W x 8’H x 12’L 4,150 gal fuel tank, mounted on utility house skid.

BV type LF rotary tongs

BJ CTS power tongs

9’W x 50’L tandem axle hydraulic catwalk trailer

A17 degree survey tool

OPI 700 DL Triplex piston pump, rated 700 bhp@1500 rpm, max pressure 4,000 lb., Detroit diesel pump engine 12V71T 500hp @ 2200 rpm, skidded with metal shed.

Click here to request further information on this equipment

 

Pig Launchers

Stock availability of three each Pig Launchers.

These pig launchers are carbon steel pipe welded with bevelled end flanged, API-5L Grade.

Dimensions vary and are as follows:

One (1) each at 52 X 16 “diameter, 0.50 ” thick and 6.80 meters long;

One (1) each at 52X 24 “diameter, 0.75 ” thick and 8.55 meters long,

One (1) each at 52X 24 “diameter, 0.75 ” thick and 11.00 meters long.

 

HALLIBURTON HT400 PUMPS

HALLIBURTON HT400 PUMPS (Ref#5281N) – 5 available

4-1/2” plungers

Max pressure 11,200 psi – max volume 10.8 bbl/min pump, serviced with new oil and filters and valve rubbers,

couples to GM 8V71 engines (serviced) approx 280-300 hp

(2) units with Eaton transmissions

(3) units with Allison 750 transmissions

Click here to request more information on this equipment

Mud Pump

 

Click here to contact us for more information on this equipment

Pipe Metal Sleeves

Availability of pipe metal sleeves in assorted sizes and quantities.

All pipe sleeves are API 5L grade 42x.

7 EA Metal sleeve 5/8 x 36” Ø x 2 meters.long – API 5L grade 42x

3 EA Metal sleeve 5/8 x 24” Ø x 2 mts.long – API 5L grade 42x

4 EA Metal sleeve 5/8 x 20” Ø x2 mts.long – API 5L grade 42x

3 EA Metal sleeve 5/8 x 18” Ø x 2 mts.long – API 5L grade 42x

1 EA Metal sleeve 1/2 x 16” Ø x 3 mts.long – API 5L grade 42x

2 EA Metal sleeve 3/8” x 16 Ø x3 mts.long – API 5L grade 42x

10 EA Metal sleeve 1/2 x 12” Ø x 3 mts.long – API 5L grade 42x

7 EA Metal sleeve 1/4” x 10” Ø x3 mts.long – API 5L grade 42x

6 EA Metal sleeve 3/8 x 8” Ø x 3 mts.long – API 5L grade 42x

3 EA Metal sleeve 3/8 x 6” Ø x 3 mts.long – API 5L grade 42x

 

KV 1000 Pump Unit

 

 

Click here to contact us for more details on this equipment

24 and 36 inch Vastas Valves

Stock availability of 2 each, 24 inch Vastas Valves and 4 each, 36 inch Vastas Valves.

24 inch Vastas Valve – class 600#

Type: Double Expanding Gate Valve, double block and bleed

Fire safe design, TCC metal to metal seats with emergency lubricant seal.

Design standard: API 6D

Bonnet: ASTM A216 Gr. WCB

Body: ASTM A216 Gr. WCB

Double Expanding Gate Face: Tungsten Carbide HVOF

Double Expanding Gate Assembly: AISI 410

Stroke: 722mm

Working Pressure: -29 to 38 Celsius, 102 bar, Max 425 Celsius, 56 bar

Test Pressure: Shell 153 bar, Closure 112 bar, Air 6 bar

Part Number. 110

 

36” Vastas Valve – class 600#

Type: Double Expanding Gate Valve, double block and bleed

Fire safe design, TCC metal to metal seats with emergency lubricant seal.

Design standard: API 6D

Bonnet: ASTM A216 Gr. WCB

Body: ASTM A216 Gr. WCB

Double expanding gate face: tungsten carbide, HVOF

Double expanding gate assembly: AISI 410

Stroke: 1072 mm

Working pressure: -29 to 38* celsius, 102 bar; Max 425* celsius, 56 bar

Test Pressure: Shell 153 bar; Closure 1112 bar; Air 6 bar

Part Number: 110

All specification and testing certificates for these valves are available for review

Click here to contact us regarding this equipment